Practical and Helpful Tips: Maintenance

      Comments Off on Practical and Helpful Tips: Maintenance

Tips on Floor Cleaning,Stripping and Waxing

Cleanliness will always be desirable. Cleaning floors may look simple but the truth of the matter is that it can at times be a bit of a challenge and that is why most people find it necessary to hire the services of a professional floor maintenance professional in Lubbock. If you want your floor to keep looking clean,well maintained and attractive,there are a few things that you need to do on a regular basis. Just about anyone can mop clean a floor,some times,but there are some other processes that are performed on floors such as stripping that require a certain level of expertise.If you have the skills and know all the right cleaning supplies that are needed to get a floor as clean as possible,you can do it yourself. If you are busy or don’t have the skills required,you may want to hire a cleaning,stripping and waxing service in Lubbock. This article will attempt to explain the three floor maintenance processes of cleaning,stripping and waxing,in the hope that this knowledge will help you do a better job.

Sweeping and dusting is an effective way of keeping your floor free of dirt or grime. Insure to clear away all spilled liquids and other mess from the floor immediately. Vacuum cleaners can be used to do a more thorough job in less time.

Place mats in places where the floor surface may be degraded by the effects of the elements of the weather such as too much moisture. If there are stains on your floor,you need to remove them;your ordinary nail polish could do wonders here. Note that your floor type determines the kind of mop or brush you use on it. For industrial floors,you can use a high power scrubber. Choose the right cleaning solution.

After you have done a serious cleaning job on the floor,you need to do some stripping. This process removes deep scratches or dirt that has become embedded onto the surface. Insure that the stripping chemical you use is one that the manufacturer recommends for your floor. You can use a mop to apply the chemical evenly all over the surface,avoiding excess in certain areas. You will then need to use your scrubbing machine to thoroughly scrape any wax buildup. Use either a squeegee or a wet-dry vacuum machine to suck away the wax and the stripping solution. Clean your floor using a mop and water and allow it to dry.

Use a clean mop head to apply evenly a thin coat of wax on the floor.starting from inside towards outwards the exit. Allow the wax to dry and then repeat the process up to 5 times depending on the condition of the floor. Buff the floor after the wax has dried up to a fine,glossy shine.

If this seems like too much work for you,it probably is; just call a reliable Lubbock floor maintenance service.

Floors Tips for The Average Joe

If You Read One Article About Waxing, Read This One